I bought a Evo -Fort 3 programmed by the place where I bought. Very easy installation. But tried it for the first
time this morning, it started fine (set up for lock-unlock -lock) and found that the heater does not come on , I
set the heat and fan to max before I shut down the truck last night. When I got in the truck all dash lights are
off even the tach doesn't register that it is running, only thing showing is a box on the display that says to
insert the key and turn to run position. There is some air blowing out of the dash but no lights on the heater
controls. I had set it for defroster, max heat and max air. Some guidance would be appreciated.